What are the precautions for installing UPS power batteries?

Precautions for the installation of UPS power battery 1. The UPS battery should be placed upright, which is more beneficial to prevent the battery from leaking from the side. In order to prevent the influence of liquid leakage, an anti-corrosion pad can be placed on the bottom of the battery. 2. The distance between UPS batteries should be about 5-10mm. 3. The battery should be prevented from being placed in a stable battery rack or battery cabinet. 4. If the UPS power supply battery has a lot of batteries and the current is large, it is recommended to make a copper transfer bar in the battery rack or battery cabinet to facilitate the wiring and prevent the accident of the thick cable pulling the battery. 5. When there are seismic requirements, the seismic facilities should comply with relevant regulations and be firm and reliable. 6. The battery should be protected from direct sunlight, can not be placed in a closed container, can not be placed in an environment with radioactive, infrared radiation, ultraviolet radiation, organic solvent gas and corrosive gas. 7. The UPS power battery leaves the factory in a wet state. During transportation and installation, it must be handled carefully to prevent short circuits. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous article: What are the methods for maintaining electric vehicle batteries?