What are the precautions for installing lithium battery packs?

Tools/raw materials: positive electrode material, negative electrode material, separator paper Steps/methods ①Pulping: use a special solvent and binder to mix with powdered positive and negative active materials, stir evenly at high speed, and then make a slurry Positive and negative materials. ②Coating: Coat the prepared slurry evenly on the surface of the metal foil, and dry it to make positive and negative pole pieces respectively. ③Assembly: Put the positive electrode sheet-the diaphragm-the negative electrode sheet-the diaphragm from top to bottom in the order of winding to form the battery pole core, and then through the process of injecting electrolyte and sealing to complete the battery assembly Process to make finished batteries. ④Formation: Use special battery charging and discharging equipment to carry out charging and discharging tests on the finished batteries, each battery is tested, and qualified finished batteries are screened out before leaving the factory. Reminder: The process technology of lithium battery pack assembly is very strict and complicated, here is just a simple analysis! When you assemble the lithium battery pack yourself, you must strictly follow the standard technology to process and assemble, and there should be no slack. Disclaimer: Some pictures and content of the articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous post: What is the electrochemical reaction of the lead-acid battery discharge process?