What are the matters in the use and operation of lithium batteries

1. The outer packaging aluminum-plastic composite film, the outer packaging of the polymer battery is aluminum-plastic composite film, it is easy to be scratched by sharp parts such as needles, nails, nickel ears, so any sharp, thin hard objects are prohibited to touch Outer packaging film, polymer lithium ion battery manufacturers believe that it is best to wear gloves or cut off long fingernails before operation, and clean the workbench before operation to prevent sharp parts from being present. Heat-sealed edge The periphery of the battery is glued at a certain high temperature, so during operation, please pay attention to the following: The edge folding has been completed during the production process of the battery and passed the sealing test. It is forbidden to open or damage Hemming. 2. When using lithium batteries, pay attention that the top sealing edge is very easy to be damaged, and it is prohibited to bend the top sealing edge. 3. The mechanical strength of the battery lugs used in lithium batteries is not exceptionally strong. Special attention should be paid to the positive lugs: spot welding of aluminum-nickel composite tape (nickel tape) on the aluminum tape must be done carefully, and repeated bending of the lugs is prohibited. (Note: The pull-out force of the aluminum/nickel tab u003c0.5Kgf.) 4. When using the lithium battery cell safety, it is prohibited to drop, impact, or bend the cell (including the bottom of the cell). It is forbidden to short-circuit the cell at any time. Causes serious damage to the battery. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: What is the principle of fuel power battery