What are the maintenance tips for electric vehicle batteries?

There are many types of batteries nowadays, such as: 48 volt 12 amp, 48 volt 20 amp, 60 volt 20 amp, etc. These are the batteries commonly installed on two-wheeled electric vehicles. There are also three-wheel four-wheel electric vehicles: 48V 32A, 48V 45A, and other types of batteries. Each battery has a different model and different distances. There is a difference in charging time. You must be clear about how far your electric car battery can run. (Generally, when a customer buys a new electric car, the battery installed for you will tell you the number of kilometers you have run.) Decide the charging time according to your battery usage length. Don’t over-discharge. Some people wait until the battery is completely used up and recharge it, and some people recharge it after a short ride. This is all wrong. Excessive discharge and overcharge will affect the battery. Service life. To put it in the most straightforward terms, if you are full, you will hold on, and if you eat less, you will be hungry. The battery must remain fully charged during the idle period. When the battery is not charged in time when not in use, it is in a state of loss of power. If the battery is stored in this state, it is prone to sulfation and lead sulfate crystals adhere to the poles. On the board, the ionization channel is blocked, leading to insufficient charging, and the battery capacity will decrease. The severity of the battery damage is proportional to the idle time of the power-deficient state. Therefore, in order to ensure the health of the battery, it must be charged once a month when the battery is not in use. It is forbidden to expose to strong light for a long time. The battery that has been exposed to the sun for a long time will lose water due to the increase in internal pressure, which will cause the decrease of battery activity and accelerate the aging of the electrode plate. Try to prevent violent braking and accelerating electric vehicles while carrying people. When going uphill, if you step on and accelerate, it will form an instantaneous high-current discharge, which will cause lead sulfate crystallization, which will damage the physical function of the battery plate. In normal driving, if it happens, you will run less than tens of kilometers for no reason. There may be a problem in a certain area. After the remaining power is used up, go to the relevant after-sales location for inspection immediately. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous article: What are the correct usage methods and precautions for mobile phone lithium batteries?