What are the maintenance methods for high-rate batteries?

Lithium battery manufacturers teach you how to maintain high-rate batteries 1. Prevent bringing high-rate batteries close to heat sources, open flames, flammable and explosive gases, and liquids, which may cause battery leakage, heat, smoke, fire and explosion; 2. High-rate batteries It should be stored in a cool, dry and safe environment. It can be stored in a clean, dry and ventilated environment with a temperature of -5～35℃ and a relative humidity of not more than 75%. Note that storing the battery in a hot environment will unpreventably cause corresponding damage to the quality of the battery; 3. If you want to maximize the efficiency of the high-rate ion battery, you must use it frequently to keep the electrons in the battery always flowing. Status: If you don't use high-rate batteries frequently, please remember to complete a charging cycle for the lithium battery every month and do a battery calibration, that is, deep discharge and deep charge once. 4. High-rate batteries are non-memory lithium batteries. Customers are advised to charge or recharge the battery pack in time after use to achieve shallow charging and shallow discharge, which will greatly increase the service life of the battery pack. In addition, it is recommended not to recharge the high-rate battery after emptying it every time, and do not discharge more than 90% of the battery pack capacity; 5. The capacity of the high-rate battery pack is a theoretical value measured at room temperature, and the actual situation is high-rate The battery capacity will be used according to the environment, temperature and other natural conditions, so the flight time will be different. In the case of low temperature in winter, high-rate batteries should be charged in an indoor constant temperature environment; 6. Shallow discharge and shallow charge are more beneficial for high-rate batteries. Only when the product's power module is calibrated for the battery, can deep discharge and deep charge be used. Necessary. Therefore, products powered by high-rate batteries do not need to be constrained by the process. Everything is convenient and can be charged at any time without worrying about affecting the lifespan. Disclaimer: Some pictures and content of the articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous article: How to repair the mobile phone battery?