What are the installation precautions for lithium-ion battery packs in detail?

(1) The connection of all wires must be stable, and the exposed copper wires must be restrained from touching each other (including staggered touching), which is easy to damage the controller and present the protection of the lithium-ion battery protection board, and present an environment without lighting. During the installation process, restrain the short circuit between the line and the line. (2) The expected light-on time during the wiring process will vary according to the time difference of the controller configuration. The maximum capacity of the factory lithium-ion battery is generally half-electric. The light will be darker when the first installation is performed, which is a normal category. Lights up normally after 2-3 days of normal charging. (3) The installation time of lithium-ion battery packs is generally held in daylight, and it is not suitable to hold the installation at night. (4) In the use of batteries, it includes the protection of aluminum-plastic composite film, top sealing (side sealing of pole handle), side sealing, and protection of pole handle and methods to prevent machine impact and short circuit. (5) Reliable positioning of the battery cell. After the lithium battery cell is assembled, it should be fastened firmly in the outer shell, and it will not work, so that the entire lithium ion battery layout is in a consolidated state. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous post: What is the difference between lithium ion batteries and lead-acid batteries?