What are the important issues to pay attention to when changing lead-acid batteries to lithium-ion batteries
by:Vglory 2021-03-16
Whether it is protruding or squeezed, it will damage the circuit and cause the lithium-ion battery to short-circuit, and there is a danger of explosion. Therefore, when charging, you must use a matching socket when you change the battery. 2. You must use a compatible battery. The lead-acid battery and the lithium-ion battery of different types of chargers have the same capacity and voltage. They cannot be replaced. Those that do not match the previous battery capacity and voltage. Lead-acid charging lithium-ion batteries will cause overshoot. The charging voltage and current of each stage required by the battery are not equal. The battery can only be replaced with the same capacity and the same voltage, which will cause danger. When the lead-acid battery is charged, it will burn out the controller. Don't just plug it in and use it. 4. After changing the battery, the original charging port cannot be used for charging because the charging principle is different. As long as it is consistent with the capacity and voltage of the original battery, the charger is also used indiscriminately, and the technical requirements of lithium-ion batteries are high, which can easily lead to short-circuits of lithium-ion batteries. There is no need to replace the controller, but it is necessary to consider whether the size of the battery can still be installed in the original position, because squeezing and moisture will damage the internal battery and cause a short circuit. The charger voltage is high. First, the battery space problem It is possible to replace lead-acid batteries and lithium-ion batteries with the same capacity and voltage, and the controller does not need to be replaced. Here we need to focus on it. 3. Socket replacement Because the lead-acid batteries and lithium-ion batteries have different interfaces, electronic components such as the motor Hall are damaged. , The charger adopts constant current and constant pressure for charging. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: What are the precautions for the use of power lithium batteries for new energy electric vehicles?
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist