What are the functions and characteristics of industrial-grade drone smart batteries

Industrial-grade drone smart battery function1. Viewing battery information. In addition to judging the battery level through the LED light, the battery's internal information can be imported into the APP software through the protocol port to observe the battery in time. information. These information data will be stored in the memory chip by the smart management board inside, and the player can grasp all the battery data at a glance through the battery information transmitted by the mobile phone APP. 2. Protection function The intelligent management board is a protection wall of the battery itself, and the intelligent management board of the intelligent battery will automatically detect the battery voltage. Once it exceeds the safe range value, it will automatically cut off the current. While charging, the intelligent management board will also The cells will be balanced. During operation, once there is a low voltage, the management version will immediately send an alarm message to the receiving end, prompting that the voltage is insufficient, and return to home immediately. 3. Idle protection The smart battery will detect its own situation. If it detects that the battery has not been discharged within 10 days, the management board will automatically start the sleep mode, which greatly reduces the self-consumption of the smart board and discharges the battery power. Up to 65% of power. 4. Self-checking function The intelligent management board detects battery information in real time to determine whether the battery is in a normal state. If an abnormality (short circuit, low voltage, etc.) is detected in the battery, it will automatically tell the user through different forms of LED flashing modes. The reason for the abnormal state. When it is detected that the remaining power is insufficient to maintain a normal return home (for example, if there is a headwind on the way back, the estimated return time may be exceeded), then perform an in-situ landing to minimize the drone from crashing due to lack of power. Features of industrial-grade UAV smart battery The important industrial-grade UAV smart battery has the following features: low temperature self-heating, communication protection function, health self-check function, intelligent protection function, abnormal recording function, fire protection function, waterproof and dustproof function, yes Charging and discharging ports, historical information storage function, charging protection function. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous article: What are the advantages and disadvantages of winding batteries?