What are the correct ways to use lithium batteries?

Correct use of lithium batteries 1. Charge a new battery: When using lithium batteries, it should be noted that the battery will enter a dormant state after being placed for a period of time. At this time, the capacity is lower than the normal value, and the use time is also shortened. But the lithium battery is easy to activate, as long as 35 normal charge and discharge cycles can activate the battery and restore the normal capacity. Due to the characteristics of the lithium battery itself, it is determined that it has almost no memory effect. Therefore, users do not need special methods and equipment during the activation process of the new lithium battery. 2. When should the charging start in normal use: Because the number of charging and discharging is limited, the lithium battery should be used up as much as possible to recharge it. Regarding the lithium battery charge-discharge cycle experiment table, the cycle life data is listed as follows: cycle life (10% DOD): '1000 times; cycle life (100% DOD): '200 times. Among them, DOD is the abbreviation of Depth of Discharge. The number of charges is related to the depth of discharge, and the cycle life at 10% DOD is much longer than that at 100% DOD. Of course, if it is converted to the relative total capacity of the actual charge: 10%*1000u003d100, 100%*200u003d200, the latter is better for full charge and discharge. Under normal circumstances, there should be reservations according to the remaining battery capacity The principle of recharging is used up, but if the battery is not expected to last the entire day on the second day, you should start charging in time. Of course, if you are willing to carry the charger to the office, it is another matter. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: What factors will affect the cycle life of ternary lithium batteries?