What are the correct charging methods for lithium battery packs for electric vehicles?

The correct method of charging the lithium battery pack for electric vehicles ●Do not charge for a long time and charge it deeply. Long charge may lead to overcharge. Lithium batteries or chargers will automatically stop charging after the batteries are fully charged, and there is no such thing as a trickle charge that lasts for more than 10 hours as a nickel battery charger. In other words, if your lithium battery is fully charged, it is also white charged on the charger. ●Don't overcharge or over discharge. Low voltage over-discharge or self-discharge reaction will cause the decomposition and destruction of lithium ion active materials, which may not necessarily be reduced. Any form of overcharging of lithium batteries will cause serious damage to battery performance and even explosion. During the charging process, the lithium battery must be prevented from overcharging. ●As the lithium battery is a non-memory battery, customers are advised to charge or recharge the battery pack regularly every time or every day after riding, which will greatly increase the service life of the battery pack. It is not recommended to charge after riding until the battery pack cannot discharge power every time, and it is not recommended to discharge more than 90% of the capacity of the lithium battery pack. ●When the electric vehicle is started, on steep slopes, dirt roads, or under strong headwinds, it is recommended that customers use pedal assistance at the same time when riding, so that the battery and motor have the longest life. ●The capacity of the lithium battery pack for electric vehicles is measured at a normal temperature of 25°C. Therefore, in winter, it is considered normal for the battery capacity to be used and the mileage to be slightly reduced. It is recommended to charge the battery pack in a place with high ambient temperature in winter to ensure that the battery pack can be fully charged. ●When the electric bicycle is not riding or parked, it is recommended that the customer unplug the link plug between the lithium battery pack and the electric bicycle, or turn off the power lock. Because the motor and controller will consume electricity when there is no load, please prevent waste of electricity. ●Lithium battery packs have some remaining power before they leave the factory, and they can also be used for short-distance riding after electric vehicles are sold. After the first ride, the battery must be charged for the first time. It is recommended that the first charge should be carried out for a while. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous article: What are the methods to distinguish between alkaline storage batteries and dry storage batteries?