What are the correct charging methods for lead-acid batteries?

2. It should be noted that too much discharge and too much charging are absolutely not acceptable. Too much charging is the process of the chemical conversion workshop, which will cause the grid metal layer to become thinner and easily break the grid. Too much discharge will cause the plate to vulcanize and become active Sponge tissue fails and shortens the life of the plate. Lead-acid batteries should pay attention to the specific gravity and liquid level of the electrolyte, and not lack of liquid. 3. Generally, the chargers for charging lead-acid batteries of electric vehicles are in a three-stage charging mode. In an environment where 100% of the electricity is used up, the charging time will be 8-10 hours, not more than 12 hours. It will affect the life of the battery. It is best not to run out of electricity every time you use it. The electric vehicle will be charged when the power consumption is 70%. The charging time is generally about 6 to 8 hours. 4. If the temperature is too high and may be too humid, it is not suitable for charging electric vehicles, which is easy to trigger danger. When charging lead-acid batteries in electric vehicles, you should only ensure ventilation, and choose a flat place for continuous charging. 5. The charging time of lead-acid batteries should be properly controlled at 8-10 hours, not more than 8 hours in summer and 10 hours in winter. After the charger indicator turns green, then float for about 1-2 hours to stop charging. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: What are the reasons for the aging and decline of lithium-ion battery materials?