What are the charging methods for Shante UPS battery?

Santak UPS power battery charging methods: 1. Constant current charging: Constant current charging uses a segmented constant current method to charge. This is generally achieved by adjusting the charging device itself. The charging current can be selected and adjusted arbitrarily, and it is highly adaptable, especially suitable for low-current long-term charging, and also beneficial to battery charging with slower capacity recovery. 2. Constant voltage charging: Constant voltage charging means that each single cell battery is charged with a constant voltage (usually a single cell battery multiplied by 2.5V). The characteristics are: the initial charging current is quite large, the battery electromotive force and the relative density of the electrolytic liquid rise rapidly, as the charging continues, the charging current gradually decreases, and only a small current passes at the end of the charging period: charging time is short and energy consumption is low. 3. Fast charging: Fast charging refers to a charging method with a large current method. Fast charging does not produce a lot of bubbles and does not generate heat, which can shorten the charging time. At present, the commonly used fast charging mainly includes pulse charging and high current fast deceleration and fast charging. 4. Equalization charging: Equalization charging is a 1~3h charging process with a small current (1/20C20A). It is important to eliminate the difference between a set of floating charging operation (that is, the working mode of connecting the DC power supply and the battery in parallel) under the same operating conditions, due to the unbalance of the whole battery set due to some reason, so as to achieve the whole battery set Balance. Disclaimer: Some pictures and content of the articles published on this site are from the Internet. If there is any infringement, please contact to delete it. Previous article: Which kinds of batteries should be paid attention to in winter?