What are the basic precautions for using lithium-ion batteries?

1. Precautions for charging lithium-ion batteries: Li-ion batteries are strictly prohibited from being charged from the discharge terminal, and must be charged from the charging socket with the supporting special charger. When the charging indicator bar on the charger stops the rotation, please remove the charging plug in real time to avoid overcharging the battery. 2. Discharge precautions: Lithium-ion battery packs have over-current protection results. When the use current of the electrical equipment exceeds the maximum output current of the product, the over-current protection circuit will act and make the electrical equipment appear to be malfunctioning. 3. Precautions for daily use: The output of the discharge terminal is not controlled by the switch on the panel. The discharge terminal will block the output only when the battery voltage is lower than 9.0V. The switch on the panel controls the output of the display and the USB socket. When the switch is turned on and the battery voltage is less than 9.1V, the display will flash at a frequency of one second and one second to remind you that you should charge in real time, and display when the battery voltage is less than or equal to 9.0V The screen goes out and the USB socket blocks the output. The goal is to protect the lithium-ion battery from over-discharge. Although it has the effect of output short-circuit protection, in daily use, the + and-power output should not be short-circuited frequently. 4. Precautions for acceptance: The normal cycle of charging and discharging lithium-ion batteries is about 500-800 times. Lithium-ion batteries that have reached the end of their life should be accepted and handled in accordance with the laws and regulations of the Mainland. 5. Storage conditions: 1) The battery system should be stored in a clean, dry and ventilated room with a temperature of 20±5 and a relative temperature of not more than 75%. 2) Beware of fighting with corrosive objects. Keep away from the heat source and not less than 2M. Keep away from moisture and moisture. 3) The positive and negative electrodes of the battery pack must not fall into any conductive foreign objects such as metals. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: What are the advantages and disadvantages of lithium-ion battery electric vehicles?