What are the assembly technologies for lithium batteries?

Lithium battery packaging technology 1. Adopt quality lithium battery packs. A qualified and stable supplier must supply a single battery with good performance. The single battery has undergone a series of safety tests and performance tests before being used after being qualified. 2. The battery structure adopts a ventilated design, and the distance between two adjacent batteries is not less than 2mm. This structure requires the battery to be fixed with a plastic bracket. 3. Take the principle of prioritizing operation safety, that is, employees are not easy to short-circuit or have better preventive measures during operation. 4. Different batches of batteries are made into typical finished products and subjected to life tests. When the relevant experience of the lithium battery PACK design specification is summarized, the finished battery products are subjected to cycle tests to obtain the actual cycle life. 5. Adopt the equipment principle, that is, try not to use manual labor, at least semi-automatically, to complete with auxiliary equipment. 6. Verify the high and low temperature performance of the battery. The cells of different PACK lithium battery manufacturers are made into finished products and tested at different rates of discharge at high and low temperatures to obtain the actual discharge curve. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: How to improve the performance of lithium battery fast charging?