What are the advantages of UPS battery fast charging?

According to the conventional charging method, the initial charge of a new lead-acid battery takes 72-100 hours, and it must be repeatedly charged and discharged several times, so that all the active materials on the plate can be reduced to lead dioxide and spongy lead to reach its rated capacity. It takes more than 20h to use this method for general charging. However, the initial charge of a new battery with a fast charger can reach its rated capacity within 10 hours, and generally it does not exceed 3 hours. (2) The capacity of the battery can be increased. Because of the rapid charging technology, it can not only remove the various polarization voltages around the plate, but also increase the depth of the chemical reaction of the plate, and the active material can be fully reduced, so that the UPS The capacity of the battery has increased. (3) The desulfurization effect is significant. The rapid charging output is a large current pulse, so some substances on the surface of the electrode plate that have been vulcanized and cannot be restored can be activated, and some batteries that cannot be charged due to vulcanization can even be restored to use. (4) Saving electric energy This is obvious, shortening the charging time itself saves electric energy. Take the initial charge of a new battery as an example. When charging with a low current slowly, it needs to consume 8 times the capacity of the battery to complete the initial charge (not including the power consumed by several charge and discharge cycles), while fast charging is compared with it , It only consumes half of the electricity. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous article: What are the important factors that affect the service life of the UPS host and battery pack