What are the advantages of medical lithium battery packs?

Today, when power lithium batteries are popular, consumers who use power lithium batteries pay special attention to the battery life of power lithium batteries. In terms of environmental protection, lithium batteries will not cause pollution, so lithium batteries have many advantages. Lithium battery manufacturers tell Here are some advantages of medical lithium battery packs. 1. Strong navigation capability. Although the weight of medical lithium battery packs is only 30% of the lead-acid battery, the medical lithium battery has a stronger continuity capability under the same voltage and capacitance. 2. Good low-temperature discharge performance. Medical lithium battery packs can work normally at -25 degrees Celsius, but lead-acid batteries work normally at -10 degrees Celsius. 3. Long charging duration: The electric capacity of the overcharged medical lithium battery is still more than 80% after idle months, and the electric capacity of the lead-acid battery is only about 40%. 4. Long cycle life: The number of charge and discharge times of medical lithium batteries is more than 500 times, and the discharge reaches 1C, and the discharge of lead-acid batteries is only 0.5C, and the life span is 300 times. 5. High specific energy: due to the small size of the lithium battery pack, but the storage capacity is more; 6. The normal working temperature range is wide: the medical lithium battery pack works in the range of -25 to 55 degrees, and the lead-acid battery Work at 10 to 40 degrees. 7. High current efficiency: unlike any previous secondary battery with aqueous solution system, the lithium battery pack will not produce gas during the normal charge and discharge process, and the current efficiency is close to 100%. This property is particularly suitable for power storage and conversion. Battery pack. 8. Clean and pollution-free: The medical lithium battery pack does not contain toxic substances such as lead, blessing, mercury, and at the same time, because the battery must be well sealed, very little gas is released during use, which does not pollute the environment. The solvent used to dissolve the binder during the manufacturing process can also be completely recovered. 9. Low self-discharge rate: The lithium battery pack adopts a non-aqueous electrolyte system, and the lithium-intercalated carbon material is thermodynamically unstable in the non-aqueous electrolyte system. During the first charge and discharge process, due to the reduction of the electrolyte, a solid electrolyte interphase (SEI) film is formed on the surface of the carbon negative electrode, allowing lithium ions to pass but not allowing electrons to pass, and making the electrode active materials of different charged states. It is in a relatively stable state, so it has a low self-discharge rate. 10. The internal resistance is small. Through a special design, the impedance of the battery can be greatly reduced, and the high-current discharge performance of the battery can be greatly improved. Part of the pictures and content of the published article are from the Internet, if there is any infringement, please contact to delete