UPS power installation considerations

Source: 2020 - 03 - 26 hits, nay: UPS power supply installation note 1, selection of proper installation location is very important. Shelves items must be well ventilated and away from water, flammable gas and corrosive materials. 2. The environment temperature between 0 to 40 degrees. If open it use at low temperatures, water will condense. Once the environment temperature more than 25 degrees, battery life every 10 degrees in half. 3. Rack UPS power should not be placed on the side, in and out of the hole should be kept unobstructed; When the load is connected to the UPS, need to shut down load first, then connect the connection, then in turn open load. 4. Installation environment should size than the chassis front, back, left, right, size 800 mm above, facilitate heat dissipation and daily maintenance; 5. Shall not place any items at the top of the shelf UPS power supply; Front and both sides must have enough of the equipment maintenance operation space; 6. Battery can be installed in a special battery compartment, the battery tank should be close to the UPS. If the battery is installed on the shelf or install away from the UPS, the battery switch shall be installed as close to the battery and wiring distance should be as short as possible. 7, good planning specific path, all channels should be able to sustain the weight of the cabinet. So in the process, should check the hallways, elevators and slope, see if there is a blind Angle. At the same time, once the power supply is ready, you should also check whether cabinets and other items. Finally, connect the battery pack with the rack of UPS power supply, connect the input and output end of the power supply, UPS power supply on the backend connection and power supply, and an external voltage meter to test the connection. No abnormal startup and commissioning. Above is the assembly process of the rack UPS and installation considerations, how to install it is better to please the professional and technical personnel to install, in order to ensure safety.