Operation method and precautions of using lithium iron phosphate battery pack as UPS power supply

The power must be cut off. The grounding resistance must be less than 100m; 6) Ensure that the electrical parameters of the UPS lithium iron phosphate battery pack system are compatible with related equipment; 7) Keep the UPS special lithium iron phosphate battery pack away from water and fire to ensure that there is no short circuit with external equipment; 4) Prohibited The battery is directly connected to the AC power supply; 5) The battery system is well grounded, do not mistake the positive and negative cables, please contact the manufacturer; 2) Before installation, be sure to cut off the external power supply of the lithium iron phosphate battery pack, and the battery is completely shut down; 2) Prohibited Connect the battery to different types of batteries; 3) It is forbidden to work with a faulty or incompatible switching power supply for lithium-ion battery packs; 4) It is forbidden to disassemble the battery; 5) In case of fire, please use iron-lithium ion battery packs that meet national requirements Fire extinguishing device; 6) Non-working or technical personnel, if the product is found to be damaged or missing parts, first check the product and packing list, the lithium iron phosphate battery pack is used as UPS precautions 1) If you want to move or repair the battery, please do not do it without authorization Open, repair or disassemble the battery, the lithium iron phosphate battery pack is used as the UPS power supply operation method 1) After unpacking, make sure that the UPS battery is off; 3) Correct wiring. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete.