Introduction to the maintenance tips of lithium-ion batteries for electric vehicles

1. Original original equipment, the unmatched current and voltage of the protection circuit during charging will cause damage to the circuit system, shorten the battery life, and even bring safety hazards. The original battery and charger are the best cp. 2. Moderate charging and discharging to prevent damage. Excessive charging and discharging will damage the battery to a great extent, so do not wait until the power is completely exhausted before charging, and do not charge for too long (avoid charging overnight), generally after the green light of the charger is on Keep it for another 1-2 hours. 3. Pay attention to the charging environment and avoid potential safety hazards. Charging in a humid rain and snow environment is easy to short-circuit the circuit; charging in the hot sun in summer is prone to spontaneous combustion. In order to ensure safety, you should choose to charge in a dry, ventilated, and cool environment. Click to enter the picture and comment 4. Prevent frequent braking, save power and reduce power. Frequent braking and acceleration will cause the battery to be in a state of high current discharge for a long time, so it is best to keep a constant speed when riding to make the battery work stably. Click to enter the picture and comment 5. Choose a place to store, away from dangerous sources. When parking daily, the whole vehicle should be stored in a ventilated place, and the lithium-ion battery should be protected from humid environments and long-term exposure, away from heat sources and flammable and explosive materials. 6. When idle for a long time, charge the electric car in a timely manner. When the electric vehicle is not used for a long time, it is necessary to prevent the lithium-ion battery from being in a state of loss of electricity for a long time, which will cause a significant reduction in the service life. 40%~60%). 6. Clean in time to eliminate hidden dangers. When you are not using the car, pay attention to the cleaning of the lithium-ion battery, remove the dust and dirt on the battery cap in time, keep it dry and clean, and prevent the battery from self-discharge; remove the charging and discharging ports of the battery pack in time. The copper rust on the contact points of the charger prevents potential safety hazards caused by poor contact. Disclaimer: The articles published on this website are all from the Internet. If there is any infringement, please contact to delete it. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: Why are lithium-ion batteries becoming less and less popular?