Introduction to the correct use and maintenance of UPS power batteries

1. Check whether the fixing bolts of the UPS battery on the bracket are tightened. If the installation is not secure, the shell will be damaged due to driving vibration. In addition, do not put metal objects on the battery to prevent short circuit. 2. Always check whether the pole and the terminal are connected reliably. To guard against oxidation of the terminal, a protective agent such as petroleum jelly can be applied. 3. Do not use the method of direct ignition (short circuit test) to check the battery power. This will cause damage to the battery. 4. In general lead-acid batteries, pay attention to adding distilled water regularly. Dry-charged batteries should be properly charged before use. As for the maintenance-free battery that can be filled with water, it is not that it cannot be maintained properly. Add distilled water when necessary to help extend the service life. 5. The air holes on the battery cover should be unobstructed. A large number of bubbles will appear when the battery is being charged. If the vent is blocked so that the gas cannot escape. When the pressure increases to a certain level, the battery shell will burst. 6. There is often a yellowish-white paste around the battery pole and cover, which is caused by the sulfuric acid corroding the root pole, line card, fixing frame, etc. These materials have high electrical resistance and must be removed in time. Disclaimer: Some pictures and content of the articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous post: How long is the service life of the 48v electric vehicle lithium battery?