Introduction to the characteristics and structure of lithium-ion batteries
by:Vglory 2021-03-14
The characteristics of lithium-ion batteries 1. It has a higher weight-to-energy ratio and volume-to-energy ratio; 2. The voltage is high, and the voltage of a single-cell lithium-ion battery is 3.6V, which is equal to the series voltage of three nickel-cadmium or nickel-hydrogen rechargeable batteries; 3. The self-discharge is small and can be stored for a long time, which is the most prominent advantage of the battery; 4. No memory effect. Li-ion batteries do not have the so-called memory effect of nickel-cadmium batteries, so lithium-ion batteries do not need to be discharged before charging; 5. Long life. Under normal working conditions, the number of charge/discharge cycles of lithium-ion batteries is far greater than 500; 6. It can be quickly charged. Lithium-ion batteries can usually be charged with a current of 0.5 to 1 times the capacity, which shortens the charging time to 1 to 2 hours; 7. It can be used in parallel at will; 8. Because the battery does not contain heavy metal elements such as cadmium, lead, and mercury, it is environmentally friendly It is pollution-free and is the most advanced green battery in the contemporary era; 9. High cost. Compared with other rechargeable batteries, lithium-ion batteries are more expensive. Lithium-ion battery structure Lithium-ion batteries usually have two appearances: cylindrical and rectangular. The inside of the battery adopts a spiral wound structure, and a very fine and highly permeable polyethylene film separator is used to separate the positive and negative electrodes. The positive electrode includes a lithium ion collector composed of lithium and cobalt dioxide and a current collector composed of aluminum thin film. The negative electrode is composed of a lithium ion collector made of sheet carbon material and a current collector made of copper thin film. The battery is filled with an organic electrolyte solution. In addition, a safety valve and PTC components are installed to protect the battery from damage when the battery is abnormal and the output is short-circuited. Disclaimer: Some pictures and content of the articles published on this site are from the Internet. If there is any infringement, please contact to delete.
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist