Installation and wiring method of lithium ion battery pack for solar street light

1. Wiring method of lithium ion battery pack and LED light, load output: positive and negative (red wire represents positive electrode, black wire represents negative electrode); the positive electrode is connected to the positive electrode of the LED light, and the negative electrode is connected to the negative electrode of the LED light. 2. Wiring method of lithium ion battery pack and solar panel, solar input: positive and negative (red wire represents positive electrode, black wire represents negative electrode); the positive electrode is connected to the positive electrode of the solar panel, and the negative electrode is connected to the negative electrode of the solar panel. Lithium-ion battery pack installation steps 1. Connect all connecting wires and check whether the charging indicator (green light G) is on normally. 2. If it is on normally, unplug the solar input after 10 seconds, and the load output LED light will be on normally. 3. Reconnect the solar input, and the load output LED will go out after 10 seconds. 4. After all the above steps are completed, the solar street light can be used normally. Statement: Some pictures and content of the articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: LED solar street light maintenance and battery components