Explain in detail the method of maintaining life storage

Detailed methods of battery maintenance to improve battery efficiency and extend its service life are problems that many friends want to achieve, but which method is correct? Today I will study with Jeffson, a lithium-ion battery manufacturer : 1. The electro-liquid temperature should be kept at about 20℃ during charging, and should not exceed 35℃ during charging. Especially in winter, pay attention to antifreeze. According to the data, when the electro-hydraulic temperature is in the range of 10~35℃, for every increase or decrease of 1℃, the capacity of the battery will increase or decrease by 0.8% of the rated capacity. 2. Open the rubber stopper of the injection port frequently, but open the vent hole so that the steam can escape. Keep the battery dry and clean to prevent self-discharge of the battery. Understand the characteristics of lead-acid batteries, use and maintain them in strict accordance with the product instructions2. The electro-liquid must be made of chemically pure sulfuric acid and qualified distilled water. At low temperatures, the liquid temperature is 15°C and the specific gravity is 1.285. 4. The injection clamp of the same material as the battery rod should be used. If a copper material clamp is used, a thin layer of petroleum jelly or butter should be applied to prevent corrosion. 5. There should be no open flames and electrical equipment with electric sparks in the charging room to prevent fire. 6. The liquid level of the battery should be 10-15 mm higher than the plate. During use, if the liquid level is found to be too low, distilled water should be added in time. 7. If it is not used within 12 hours after refilling, or if it is idle for a long time after use, it should continue to be used after refilling as required. 8. When the specific gravity of the electro-hydraulic drops to 1.175, stop charging immediately. It is strictly forbidden to place metal objects and tools on the battery to prevent short circuit between the electrodes. 10. Before wiring, check whether the positive and negative signs of the battery are correct, and whether the single-cell battery has reverse polarity. 11. The liquid level of the battery should be 10-15 mm higher than the plate. During use, if the liquid level is found to be too low, you should add distilled water in time. 12. The battery is best to be used after charging for 3~4 hours after the first injection, which is more conducive to the performance of the battery. Non-dry batteries must be charged before use. Disclaimer: Some pictures and content of the articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous post: Lithium-ion battery charging tips make your mobile phone battery more durable!