Correct and reasonable charging method for polymer lithium battery

Correct and reasonable charging method for polymer lithium battery: 1. When charging the polymer lithium battery, the battery charger should be an original universal battery charger, otherwise it will directly affect or damage the polymer lithium battery. 2. The battery charging of the polymer lithium battery should be expanded by a certain slow charging method, and the flash charge should be prevented as much as possible. Repeated charging and discharging will also directly affect the service life of the polymer lithium battery. 3. Unsafe use of electronic equipment for up to 7 days, polymer lithium battery should be properly stable before safe use, polymer lithium battery has self-discharge. 4. The charging time of the polymer lithium battery is not necessarily the longer the time, the better, the ordinary battery charger, polymer lithium battery should be suspended immediately when the battery is fully charged, otherwise the generated polymer lithium battery will directly affect the heat or temperature Rechargeable battery performance indicators. 5. After charging the polymer lithium battery, try to prevent it from being placed on the battery charger for up to 10 hours. If it is not used for a long time, please be sure to peel off the electronic device and the polymer lithium battery. Practical tips for initial charging of ternary polymer lithium battery Lithium polymer battery has high kinetic energy, small size and light weight. So, for the first charge of the ternary polymer lithium battery, what kind of practical suggestions do we have? Let us continue to look for it! At this stage, the key to the lithium battery is the voltage and current limiting method, early regulation circuit (CC) battery, rechargeable battery Accept the strongest professional ability in history. As time goes by, the battery will further strengthen the electrode polarization effect in the process of continuous expansion, the temperature rises, and the working voltage continues to rise. When the charging is about 70~80%, the working voltage must reach high Working voltage, the battery limit voltage is a constant voltage (CV) battery. In the constant voltage link, it is called drip charge. It takes about 30% of the time to charge 10% of the electricity. As the current intensity decreases, the temperature will not rise. In this process, it is necessary to fully consider the total operating voltage or average operating voltage control of the battery pack. In fact, there are always people whose working voltage is higher than the working voltage of other rechargeable batteries in the battery pack, and they have already entered the battery charging link. In the same way, when the battery is charging, there will also be battery charging and rechargeable batteries in the group. Overcharge and overdischarge can cause fatal damage to the rechargeable battery. The only difference is that overcharging will cause a lot of air, fire and explosion, and the appearance is very strong. The change of over-release type is mild, but the speed of no action is very fast. It should be strictly prevented during normal and safe use. The first step to promote the maintenance of polymer lithium batteries is the performance of lithium polymer batteries. Compared with power lithium batteries, lithium polymer batteries continue to improve the leakage of rechargeable batteries, but they have not been completely resolved. At the same time, lithium batteries can be made into ultra-thin rechargeable batteries with a volume of 3.6V400 mAh and a thickness of 0.5mm. In terms of discharge capacity, polymer lithium batteries are also more than 10% higher than traditional power lithium batteries. In normal safe use, as a kind of power lithium battery, lithium polymer battery often pays attention to the specific situations of short internal charging structure of the battery, short external charging structure, and overcharging. The reason is that the chemical nature of lithium oxygen is very active. When the rechargeable battery is charged, the internal structure of the rechargeable battery will continue to increase the temperature. When the temperature is too high, it may form a new Santana explosion. Use rechargeable batteries safely. Therefore, when you are preparing to advance as much as possible, do not overcharge and discharge as much as possible. It is also to maintain the safe use of stable and planned rechargeable batteries. It is not easy to consume battery capacity and the battery is not filled for a long time at this time ( Usually the 8 hour range is the best choice). Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous post: The difference between lithium battery and Ni-MH battery charging method