Can Li-ion batteries directly replace lead-acid batteries?

1. The parameters of the lithium-ion battery that matches the equipment: replace the lead-acid battery with a lithium-ion battery. The most important thing is that the parameters of the lithium-ion battery must match the parameters of the equipment. The matching here is not only the current The matching of, voltage, etc., as well as the matching of the ambient temperature, working time, and charging mode of the equipment. 2. Replacement of the charger: Replace the lead-acid battery with a power lithium-ion battery, and the charger will be replaced simultaneously. Because the charging curve of lead-acid batteries is completely different from that of lithium-ion batteries, and lithium-ion batteries generally have protective plates to ensure that lithium-ion batteries work within the normal range, the requirements for the parameters of the charger are higher than those of lead-acid batteries. , If you directly use the previous charger to work, it may cause dissatisfaction or excessive voltage, causing the lithium-ion battery protection board to start and not charge. After solving the above problems, basically replacing the lead-acid battery with a lithium-ion battery is complete. Another point is that the volume and weight of lithium-ion batteries are about 1/2 of that of lead-acid batteries, so if the specifications and capacity of the relevant equipment are not satisfied during replacement, they can be upgraded together. Disclaimer: Some pictures and content of the articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: How to charge the lithium-ion battery for the first time