Source: 2020 -
03 -
25: every click traffic camera battery take on the plane?
Camera battery maintenance method 1, custody, want to have a lot of attention on center.
The recent purchase of rechargeable battery power is generally low or no electricity, should stop using before use.
Fully charged battery is very hot, before loading the camera should be cooling.
In order to extend the shooting time, try not to use in the process of filming the LCD viewfinder;
Reduce the number of optical zoom;
To reduce the use of flash;
Pay attention to the battery insulation skin integrity, if found damaged should use scotch tape to paste.
2.
We should try to save the battery when using usage.
First is to avoid unnecessary use zoom, hypothesis is true zoom, I suggest you move the camera position to obtain the same zoom effect!
2 it is to avoid the frequent use of flash, flash power consumption big, mirror sea studio advised if there is no generally don't use.
In addition, when adjusting the drawing, it is best to use the viewfinder instead of LCD screen flash.
LCD flash screen consumes a lot of energy, so it's best to control them at a minimum, because most of the photography can be done through the viewfinder.
Of course, you can't turn it off in order to save electricity.
LCD flash, for example, is an important part of close-up photography.
Finally, remember that the digital camera when not turn it off.
3.
Most people don't pay attention to the battery.
In order to avoid problems with the power loss, please ensure that the contact point at the ends of the battery and battery cover the inside of the contact point is clean.
If necessary, please use clean soft dry cloth to wipe gently.
Do not use detergent or chemical solvents, such as thinner or alcohol solvent, clean digital cameras, battery or charger.
In addition, before the use of charging, please use soft dry cloth to clean the ends of the battery contact point, try to stick to clean the ends of the battery contact, to ensure that the batteries can be enough strength.
4.
The right way to recharge the battery also has a great influence.
Use the original charger and the battery will help extend the life of the battery.
About charging time, it depends on the charger and battery, and the use of voltage stability and other factors.
If the battery for the first time to use (
Or months did not use)
, lithium battery charging time must be more than 6 hours, nickel metal hydride batteries must be more than 14 hours, or battery life will be shortened.
Usually by a few charge and discharge process, to achieve the optimal power.
And the remaining battery power, try not to charge repeatedly, to ensure that the battery life.
If you give a nickel cadmium battery, after a period of time to stop charging, then charging.
This is known as' memory effect, it will reduce the total capacity and using time of the battery.
With the passage of time, the storage capacity will be less and less, the speed of the battery will be faster and faster.
5.
If you want to for a long time not to use a digital camera, you have to or from the digital camera battery charger, discharge, and store it in a boring, a cool environment, do not store batteries with ordinary metal objects.
Due to long-term storage in a digital camera or battery charger, may lead to problems such as leakage, damage.
In order to avoid problems with the short circuit batteries, battery when not needed there should be a shield.
Store to be very careful when fully charged battery.
No matter use what type of battery, don't put them in bags, bag, handbag, or other containers of metal objects.
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist