Analyze the structural design process of the power lithium-ion battery system

What is the structural design process of the power lithium-ion battery system? Many people should not know. Today, the battery shell experts of the subcontinent will share with you that when the battery module is designed before the vehicle design requirements, the design process of the battery module should be It's like this: The structure design process of the power battery system 1. The fixed connection method of the battery pack should be based on the overall requirements of the power lithium-ion battery system design and the selected battery structure shape. 2. The assembly of the battery module should have proper sealing, and each structural component should have sufficient strength to prevent deformation or damage caused by internal and external forces of the battery. 3. Batteries and battery packs should have special fixing devices, compact in structure, and set up ventilation and heat dissipation channels according to the heat dissipation of the battery box. 4. The conductive connection distance between battery cells should be as short as possible, reliable and flexible. The conductive capacity of each conductive connection should meet the maximum overcurrent capacity of the electrical equipment. 5. Fully consider the insulation protection between battery string and parallel high voltage, such as insulation gap, creepage distance, etc. Frankly speaking, the structural design process of the power lithium-ion battery system is actually the steps of battery → module → system. If you want to know more about the power lithium-ion battery system, please stay tuned for updates. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous post: Talk about the recycling value of lithium batteries