Analyze the reason why the lithium battery cannot be charged

Lithium batteries are commonly used batteries in electronic products. It is often used in batteries for two-wheeled three-wheeled electric vehicles, electric vehicles, power tools, and laptop computers. We often encounter situations like this. Sometimes when we use lithium batteries, we find that charging does not enter electricity. At this time, we must be very worried. Now lithium battery manufacturers will analyze the reasons why lithium batteries do not enter electricity. 1. The contact of the lithium battery electrode is dirty, and the contact resistance is too large, resulting in excessive voltage drop. When charging, the host considers it is full and stops charging; 2. The internal charging circuit of the lithium battery cannot be charged normally; 3. The internal failure of the lithium battery. Battery charging does not enter the solution 1. If the charger interface is aging or the charger itself is damaged, please replace it with a new charger for testing. 2. Poor contact caused by metal oxidation of the charging hole is a hardware failure. We need to contact after-sales service for detailed inspection and maintenance. 3. If there is a problem with the quality of the charging cable, please replace it with a new one. 4. If the life of the lithium battery is exhausted or damaged, replace the battery directly. The dry source new energy of lithium battery manufacturers tells everyone that when charging the lithium battery, do not overcharge or over discharge. Sometimes the charging failure may be the cause of the charger. Check one by one to solve it. Disclaimer: Some pictures and content of the articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous article: New technology allows the battery to be fully charged within 5 minutes