Analyze the precautions for charging the motorcycle battery

Analyze the precautions for charging motorcycle batteries. There are many things to pay attention to when charging motorcycles. Scientific charging can prolong battery life and improve the performance of motorcycles. Today, lithium-ion battery manufacturers share with you the precautions for charging motorcycle batteries: 1. Because hydrogen will appear in the battery during charging, and open flames will occur when hydrogen is mixed with air, it is strictly forbidden to set off fireworks, open flames and fireworks during charging. Static electricity from friction. It is best to open doors and windows to allow air to flow through. 2. The output voltage of the charger does not meet the charging requirements. A 1N4003 silicon rectifier diode can be connected to the two-pin LM7806. 3. Because hydrogen will appear in the battery when charging, and there will be an open flame explosion when the hydrogen is mixed with air, so it is strictly forbidden to cause fireworks, open flames and electrostatic friction during charging. . It is best to open doors and windows to allow air to flow through. 4. After 8 hours of charging, the voltage of the motorcycle battery will not change compared with the voltage when it is not charged, or when it is not charged, check whether the connection is good. If there is a spark between the battery terminal and the charger, remove the dirt and oxide layer at the connection, and then reconnect it. 5. The motorcycle battery electrolyte contains sulfuric acid, so protection should be strengthened to prevent the skin, eyes, and clothing from being stained with the electrolyte. Once stained, don't worry, just wash it with plenty of water. Disclaimer: Some pictures and content of the articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: Preparation of polymer electrolyte for lithium ion batteries