Analyze the installation specifications of lithium battery solar street lights

1. Solar panel installation The standard solar panel and the panel bracket are installed together. The four screws need to be fastened. Please pay attention to the direction of the junction box on the back of the solar panel. (Note: Please pay attention to the solar panel facing the south direction during the erection process, and the guard device is under the tree or near other obstructions.) 2. LED lamp installation Before the standard LED lamp and the pole arm installation, the lamp should be wired Pass the cable into the light pole support arm, pass through the top of the light pole, and then install the LED lamp on the light pole support arm, tighten the screws, and the light source must be parallel to the flange at the end of the lamp head device to ensure that the LED lamp is erected after the light pole is erected The light source part is parallel to the ground to achieve a better lighting effect. 3. Lithium battery intelligent storage and control integrated machine device The standard lithium battery intelligent storage and control integrated machine is installed with the light board bracket. The four screws need to be fastened. Please pay attention to the direction of the outlet of the lithium battery intelligent storage and control integrated machine should not be upward. Fourth, lithium battery solar street light wiring method 1. First connect the LED lamp cap cable; Note: The red cable is connected to the red cable, and the black cable is connected to the black cable. The 12V system has different positive and negative poles. 2. Turn on the system switch (system indicator lights up) and the LED head lights up. 3. Connect the solar photovoltaic panel cable again, and the LED lamp holder will be calmed down. Note: The red cable is connected to the red cable, and the black cable is connected to the black cable. The 12V system has different positive and negative poles. 4. The installation is completed. Foshan Caizhizhiguang New Energy Technology Co., Ltd. is a high-tech company focusing on new energy research and development, IoT intelligent lighting control system development, hardware planning and production and overall processing methods. Provide customers with one-stop solutions for street lamp development, planning, production, installation, protection, intelligent control, etc., and satisfy customers' personalized street lamp lighting needs from all aspects of hardware and software. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete.