Analyze the correct storage environment for lithium batteries
by:Vglory 2021-05-14
How to store lithium batteries in the correct storage environment Because of their large capacity and no recall effects, lithium batteries have been used in more and more fields. In the use of lithium batteries, several factors are generally considered, and the most important is the maintenance and safety of the battery itself. It is speculated that improper storage and maintenance may cause damage to the battery and prevent fires, explosions, etc. So how to store lithium batteries under what environmental conditions? 1. Lithium batteries are also called lithium batteries. Continuous discharge, but also intermittent discharge. Such batteries are widely used in low-power electronic products. Once the power is exhausted, they can no longer be used. Lithium batteries have low self-discharge and can be stored for up to 3 years. It is a good idea to store lithium primary batteries at low temperatures. Note: Lithium primary batteries and lithium batteries are different. Lithium primary batteries cannot be charged and charging is very dangerous! 2. Lithium batteries are also called secondary lithium batteries. It can be stored at 20°C for more than half a year. This is due to its low self-discharge rate and most of its capacity can be recovered. The self-discharge phenomenon of lithium batteries, assuming that the battery voltage is kept below 3.6v for a long time, will cause the battery to over discharge, damage the internal structure of the battery, and reduce the battery life. Therefore, long-term storage of lithium batteries should be charged once every 3 to 6 months, that is, with a voltage of 3.8 to 3.9V (the optimal storage voltage of lithium batteries is about 3.85v), and the depth of discharge is 50-60%. Not to be full. The battery should be kept in a monotonous environment of 4℃~35℃. Keep away from high temperature and direct sunlight. I just bought the small battery inside the lithium battery. This is because the storage function of the lithium battery is an important parameter to measure the safety level of the battery induction effect. The electrochemical functional components of the lithium battery are stabilized in order to ensure the quality of the battery. So we must charge it before use. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: Analysis of the advantages and disadvantages of lithium-sulfur batteries
We are here to help you! If you close the chatbox, you will automatically receive a response from us via email. Please be sure to leave your contact details so that we can better assist