Analyze the correct charging of lithium iron phosphate battery packs

1. Considering that when single-cell batteries are charged in series, the inconsistency between lithium battery packs will gradually increase. In order to ensure the service life of the battery, the only way to reduce the utilization rate of lithium battery packs and equalize charging is used to reduce the inconsistency of battery pack characteristics. An effective method can balance the characteristics of the battery, thereby increasing the utilization rate of the iron phosphate battery pack and significantly prolonging the battery pack life. 2. When charging the lithium iron phosphate battery pack, the temperature should preferably be within 0-45°C. Such a temperature is more conducive to the activation of the chemical properties in the lithium battery pack and makes the charging efficiency higher. 3. Charging is an important step when using lithium batteries. Proper and reasonable charging is good for prolonging the life of lithium battery packs, and brutal charging will have a great impact on battery life. Regarding the charger of the lithium iron phosphate battery pack, it is best to use the special charger equipped by the manufacturer. Do not use other chargers of other models or unsuitable charging voltages at will. Can the chargers of lithium battery packs and lead-acid batteries be mixed? Because the lead-acid battery charger is generally set to two-stage or three-stage charging mode, the voltage levels of the lithium battery pack and the lead-acid battery do not match. There are also many types of lithium batteries, and battery performance and battery protection board parameters may be different. Therefore, unlike lead-acid batteries, lithium batteries have universal battery chargers. Generally speaking, lithium batteries are equipped with special chargers when they leave the factory. In order to protect the lithium battery, a dedicated charger is required. Although the lithium iron phosphate battery pack has a protection board, it can be used for protection when it is theoretically overcharged or overdischarged. If the overcharge protection voltage is often triggered during charging, the output voltage of this charger is set incorrectly. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: Safety comparison between lithium iron phosphate battery and ternary lithium battery