Analysis on the use, maintenance and maintenance of car batteries

The use, maintenance and maintenance of car batteries People wear cotton jackets in cold weather, wear a t-shirt in the hot season, and the use of human health in the normal temperature range. Car batteries, car batteries are important power devices, lighting, Lighting and audio equipment are also getting higher and higher by their power sources, car LCD screens, touch screens, and electronics. Car batteries have put forward higher requirements, and their dependence is increasing, so we usually carry out reasonable maintenance on our car batteries. And maintenance is necessary, so which methods can effectively protect the battery? The following are 8 suggestions for car owners. (1) Charge the battery regularly. The car should be started regularly to charge the battery. (2) When the pointer of the ammeter shows that the stored power is insufficient, charge it in time. (3) When using a new battery for the first time, the surface should be wiped clean, then open the refueling hole to insert and remove the closure, a funnel with glass or acid-resistant electrolyte will be added to the upper and lower scales of each battery, not without metal The vessel is then connected to the charging circuit for initial charging. The initial charging temperature should not be higher than 4012, and the initial charging time is about 40-60h. (4) The charging current of the battery is generally 10% of the nominal charge of the battery. (5) Commonly used battery charging methods include a fixed current charging method and a fixed voltage charging method. They should choose from the best according to their different characteristics. Only in this way can the battery be charged scientifically and reasonably, the service life of the battery can be prolonged, and unnecessary economic losses can be reduced. (6) When installing the battery, it should be connected to the wire first, then to the connection between the batteries, and finally to the wire. Remove the battery from the vehicle in reverse order. When disassembling and transporting the battery, it should be handled with care and should not be bumped or dragged on the ground. Do not overcharge high current. A fully charged battery should maintain a stable current of 0-5a during normal operation of the vehicle. (7) Prevent battery over-discharge and long-term wear and tear. (8) When using the battery in winter, heat preservation equipment should be installed to keep the battery fully charged to prevent the decrease of electrolyte density and icing, which may lead to failures such as battery cell rupture, plate bending, and loss of active materials. Really let the car owner start from the details, what is the fault in the car, so that the problem can be solved in time, check your battery usually more, and prevent problems before they occur, you are suitable for the car, and the car will be more suitable You don't lose your temper suddenly, you will still be in a driveway. Disclaimer: Some pictures and content of the articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: Comparison of the characteristics of EPS emergency power supply and other backup power supplies