Analysis on the maintenance of lithium batteries

1. Lithium batteries should be stored in a cool, dry and safe environment. They can be stored in a clean, dry and ventilated environment with a temperature of -5～35℃ and a relative humidity of not more than 75%. Note that storing the battery in a hot environment will cause unpreventable damage to the quality of the battery. 2. Prevent the lithium battery from being close to heat sources, open flames, flammable and explosive gases, and liquids, which may cause leakage, heat generation, smoke, fire and explosion of the battery. 3. If the lithium battery needs to be stored for a long time (more than one month), the battery power should maintain 30% to 50% of the nominal capacity, and the battery needs to be recharged for 12 hours per month during storage. 4. Batteries should be packed in boxes for transportation. Violent vibration, bumping or kneading should be prevented during the transportation, and the sun and rain should be prevented. Cars, trains, ships, airplanes and other vehicles can be used for transportation. 5. Metal objects should be prevented from entering the battery box during the storage of lithium batteries, which may cause leakage, heat generation, smoke, fire and explosion of the battery. 6. If the lithium battery is used in an environment higher than the specified operating temperature, that is, above 35C, the power of the battery will be continuously reduced. If the lithium battery is charged at such a temperature, the damage to the battery will be even greater. Therefore, it is a good way to extend the life of the lithium battery as much as possible to maintain the appropriate operating temperature. 7. To give full play to the maximum efficiency of lithium batteries, it is necessary to use them frequently to keep the electrons in the lithium battery in a flowing state. If you don't use lithium batteries often, please remember to complete a charge cycle for lithium batteries every month and do a power calibration, that is, deep discharge and deep charge once. 8. Shallow charging and shallow charging are more beneficial for lithium batteries. Only when the product's power module is used for calibration of lithium batteries, it is necessary to deep discharge and deep charge. Therefore, products that use lithium battery power do not need to be constrained by the process. They are all based on convenience and can be charged at any time without worrying about affecting their lifespan. Disclaimer: The articles published on this website are all from the Internet. If there is any infringement, please contact to delete it. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: UPS battery working requirements and matters