Analysis of UAV Intelligent Lithium Battery

Analysis of UAV Intelligent Lithium Battery The universal battery plug of UAV battery is t-shaped, and the power cord is connected to XT60 for output. This battery plug is the same as the docking plug of the electric unicycle, and male and female are selected for functional grafting. The lithium battery used by the drone is T-type. Planners prefer to call these batteries lithium batteries, and planners prefer to call them T-type batteries, because T-type batteries are very consistent with the planners' concept of assembling drones. The battery can be removed for easy user replacement. A docking test was carried out on the UAV battery plug. The drone battery is made of special battery materials and supports a large discharge rate. The drone battery can be quickly charged with a dedicated battery charger. UAV battery controller prompt: The UAV is controlled by a quad-rotor navigator, and the instantaneous starting current reaches more than 15A. The host controller will detect various battery conditions at any time. If the battery voltage is insufficient, the controller will return to the address of the remote control. Generally speaking, the lithium battery of this drone is the smartest. After being perfectly connected with the host controller, the battery can complete basic intelligent control. But if the battery can be charged intelligently during flight, it may be more perfect. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: Introduction to thermal protection of lithium batteries