Analysis of the purpose and precautions of battery cell electrical function sorting

Try to keep the power of each cell in each component within the design range. 2. Points to note for the lithium battery active sorting machine: 1. It is strictly forbidden to touch the battery slices with bare hands; 2. When working, the battery slices should be handled with care; 3. The standard slices should be calibrated before starting the test, and when testing different specifications of battery slices Use different specifications for calibration; 4. Punctually check whether the equipment is in good condition; 5. Keep your eyes on the light source during the test to prevent damage to your eyes; 6. Check that the outer packaging is not damaged before unpacking the battery. Phenomenon, if any, take the record and report it. If there is no damage, you can open the package to check the battery; 7. Use it as soon as possible after opening a package, and beware of oxidation. If it cannot be used up, it must be sealed and stored. Due to the randomness of the cell manufacturing conditions, the functions of the batteries produced are not the same. Therefore, in order to effectively combine the battery packs with the same or similar functions, they should be classified according to their functional parameters; the battery test sorting means that the test is passed. The size of the battery's output parameters (current and voltage) classifies it. In order to improve the utilization rate of the battery, make the battery package of qualified quality. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete.