Analysis of the correct maintenance method of UPS power lithium battery

⒈It is forbidden to connect an inductive load to the output port of the lithium battery UPS power supply. ⒉When using the UPS power lithium battery, you must follow the relevant regulations in the product manual or user manual to ensure that the live, neutral, and ground wires are in compliance with the requirements, and users are not allowed to change their mutual order at will. ⒊General UPS battery discharge has protective measures, but after discharge to the protection shutdown, the battery can be restored to a certain voltage, but at this time, restarting is not allowed, otherwise the battery will be over-discharged. ⒋ Regarding UPS power batteries stored for a long time, the UPS should be turned on and charged every 3 to 6 months, otherwise the UPS host and battery will be damaged. ⒌When using lithium battery UPS, pay attention to the various parameters of UPS, such as input voltage range, output waveform, output power, long power supply time, conversion time, battery brand, machine noise, volume, weight and other parameters. ⒍The use environment of UPS lithium battery should be well ventilated to facilitate heat dissipation and keep the environment clean. ⒎Perform maintenance work on lithium battery UPS power supply on a regular basis. Clean the dust in the machine, measure the voltage of the lithium battery pack, check the fan operation and test and adjust the system parameters of the UPS. ⒏It is forbidden to use over load. The maximum starting load of the UPS power battery is best controlled within 80%. If it is overloaded, it will often break down the inverter tube in the inverter state. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: Introduction to three common battery types