Analysis of the characteristics of UPS batteries

The characteristics of UPS batteries are as follows: 1. Simple: The gas that appears in the UPS battery during charging is basically absorbed and reduced into electrolyte, and there is basically no electrolyte. 2. The electrolyte with high liquid holding capacity is absorbed in the special separator and kept in a non-flowing state, so it can be used even if it falls down. 3. Superior performance: Excessive gas can be released due to extreme overcharge operation errors to guard against battery breakage. 4. Small self-discharge electrode: the grid is processed with special lead-calcium alloy to control the self-discharge. 5. Long life and good economy: UPS battery grid adopts special lead-calcium alloy with good corrosion resistance. At the same time, special separators are used to keep the electrolyte, and at the same time, the positive plate is pressed to be active and prevent falling, so it is a kind of Long-life, economical battery. 6. Small internal resistance: Due to the small internal resistance, large current discharge characteristics are good. 7. Excellent recovery ability after deep discharge: In case of long-term discharge, as long as it is fully charged, there is basically no capacity, and it can be recovered soon. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous post: Correct discharge and maintenance analysis of lithium batteries