Analysis of the characteristics of lithium battery packs and precautions for use

Features of lithium battery pack 1) The lithium battery pack has complete functions and can be used straight. 2) The PACK of the lithium battery pack requires the battery to have a high degree of consistency, including capacity, internal resistance, voltage, discharge curve, life, etc.; 3) The cycle life of the lithium battery pack PACK will be lower than the life of a single battery. Precautions for the use of lithium battery pack 1. The wire connected to the lithium battery pack must be firm, and the copper wires must be intertwined and contacted. If they are interlaced and contacted, it will cause damage to the controller of the lithium battery. 2. Be sure to pay attention to the waiting time for lighting when wiring. This time is set by the controller. Lithium battery packs are generally half-charged when they leave the factory, so the electronic equipment we buy is generally half-powered. Electricity, these are normal phenomena. 3. Installing the lithium battery pack is not suitable for assembly at night, so try to assemble it during the day. 4. Storage requirements: In an environment with a temperature of 25±5°C and a humidity of no more than 50%, the aluminum foil must be protected from the corrosion of air and water vapor during transportation. 5. The internal storage of electric energy in lithium batteries is achieved by a reversible chemical change in electrochemistry. Excessive discharge will cause irreversible reactions of this chemical change. Therefore, lithium batteries are most afraid of overdischarge. 6. Pay attention to the use and positioning of the battery cell of the lithium battery pack. Beware of collisions and open circuits. The battery must be firm and watch out for loosening. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete it. Previous: What should I pay attention to when using Ni-MH batteries?