Analysis of the application method of ternary polymer lithium battery

Ternary polymer lithium battery refers to a lithium battery that uses lithium nickel cobalt manganate (Li (NiCoMn) O2) ternary positive electrode material as the positive electrode material. The ternary composite positive electrode material uses nickel salt, cobalt salt, and manganese salt as materials. The ratio of nickel, cobalt, and manganese can be adjusted according to actual needs. The battery with ternary materials as the positive electrode has high safety related to lithium cobalt oxide batteries, but the voltage is too low to use on mobile phones (the cut-off voltage of mobile phones is generally around 3.0V). The feeling of lack of capacity. The method of using ternary polymer lithium battery is as follows: 1. When charging for the first time, make sure that it is overflowing within 5-6 hours. Since the ternary polymer lithium battery has not been charged or discharged when it is not used at the factory, the charging time should not be too long. 2. When charging for the first time, do not let the ternary polymer lithium battery be completely discharged. Under normal circumstances, the power of the new ternary polymer lithium battery will not be too much, nor will it be too little. When the power of the ternary polymer lithium battery displays the final grid, you can be ready to charge. 3. When charging for the first time, choose to charge in daylight. Charging at night is very easy to overcharge and damage the battery. It is easy to control the charging time during the day when charging, so pay attention to the time when charging. 4. If the ternary polymer lithium battery is charged for the first time in summer, the charger may generate heat quickly and very high, so the charger should not be placed on the object that simply heats up, and it is best not to put it on. On the seat of the battery car, beware of a fire. 5. At the time of the second charge, you can choose deep discharge, and then perform a long-term charge. This charge can last for 8-9 or even 10 hours, in order to make the ternary polymer lithium battery chemical reaction complete once. Charging cycle. 6. Purchasing quality-guaranteed ternary polymer lithium batteries When buying ternary polymer lithium batteries, you should choose a quality-guaranteed lithium battery manufacturer. Don't buy inferior products for cheap. 7. When charging the ternary polymer lithium battery, you should choose a large area and don’t squeeze in a small and blocked space. This is not safe, and you can also give yourself room to respond. At the same time, you should pay attention to the time when choosing the location. Avoid humid, oily and other environments. 8. It is best to choose the time of charging during the charging time. Try not to charge the ternary polymer lithium battery overnight. Paying attention to the charging time can also let the risk come and there is a time to deal with it. 9. Beware of overcharging and charging. It is best not to exceed 8 hours. Overcharging will cause the service life of the ternary polymer lithium battery to become shorter, and there may be an over-voltage situation. 10. Regular maintenance When buying a ternary polymer lithium battery, you should also pay attention to regular maintenance. Check the charging circuit and plug from time to time, and beware of risks such as aging and short circuits. Ternary polymer lithium battery refers to a lithium battery that uses lithium nickel cobalt manganese ternary positive electrode material as its positive electrode material. There are many kinds of positive electrode materials for lithium batteries, including lithium cobalt oxide, lithium manganate, lithium nickelate, ternary materials, Lithium iron phosphate, etc. At present, the batteries of ternary materials have replaced the lithium cobalt oxide batteries that were widely used before, and are widely used in the field of notebook batteries. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous post: Which one is better, lithium battery or lithium polymer battery? What are the differences