Analysis of rules about charging drone batteries

1. When it comes to drone photography, you want to spend most of your time capturing picturesque shots in the air, but remember that your battery must be fully charged before you can use it for the first time. Charging the battery is simple, just like charging any other device, just plug the battery into an approved charger, and then plug the charger into a power outlet. If you try to use a charger that is different from the specified charger, there may be a danger of overheating. u200b2. There is an LED indicator below the power button outside the battery, which is used to indicate the current battery level and power cycle. If you want to check the battery power, just press the power button once when the battery power is off, and the corresponding LED indicator will light up. 3. Do not overcharge the drone battery to avoid battery swelling or malfunction. It should be charged under observation. 4. The battery comes with many protection functions to make it work normally. Some of these protection measures are that the battery will automatically stop charging when it is full; the battery can only be charged at a suitable temperature; when a short circuit is found, the power will be cut off; and the application will indicate whether the battery is damaged. u200b5. Take the UAV Inspire1 battery as an example. In order to maximize the battery power, the Inspire1 battery has a sleep mode that starts after the UAV is inactive for more than 10 minutes. In addition, there is an LED indicator below the power button outside the battery to indicate the current battery level and power cycle. If you want to check the battery power, just press the power button once when the battery power is off, and the corresponding LED indicator will light up. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: Analysis of polymer battery performance advantages