Analysis of Fuel Power Battery Technology Classification

The types of fuel power cells can be roughly classified according to different methods as follows: 1. According to the operating mechanism of fuel power cells. Divided into acid fuel power battery and alkaline fuel power battery. 2. According to the different types of electrolytes, there are acidic, alkaline, molten salts or solid electrolytes. Therefore, fuel power cells can be divided into alkaline fuel power cells (AFC), phosphoric acid fuel power cells (PAFC), molten carbonate fuel power cells (MCFC), solid oxide fuel power cells (SOFC), and proton exchange membrane fuels. Power battery (PEMFC), etc. 3. Divided by fuel type. There are organic fuels such as hydrogen, methanol, methane, ethane, toluene, butene, butane, and gaseous fuels such as gasoline, diesel and natural gas. Organic fuels and gaseous fuels must be reformed into hydrogen through a reformer to become fuel power Battery fuel. 4. According to the working temperature of the fuel power battery. There are low temperature type, the temperature is lower than 200℃; the medium temperature type, the temperature is 200～750℃; the high temperature type, the temperature is higher than 750℃. The other type is fuel power cells that work at high temperatures (600-1000°C), such as molten carbonate fuel power cells (MCFC) and solid oxide fuel power cells (SOFC). Such fuel power cells do not use precious metals. As a catalyst. However, due to the high working temperature, a composite waste heat recovery device must be used to utilize the waste heat, which is large in size and heavy in mass, and is only suitable for use in high-power power plants. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete.