Analysis of charging method and maintenance of polymer lithium battery

The charging method of polymer lithium battery: When charging the battery of a mobile phone without electricity, the first thing to find is a genuine charging head that is most suitable for the mobile phone, otherwise it will be very simple to cause the destruction of the rechargeable battery when the battery is charged, or Because of compatibility issues with genuine charging heads, etc. Everyone knows that fast charging is applicable to mobile phones. If you do not have a unique and important application place, then it is best to use slow charging when charging the battery, so that the service life of the mobile phone can be ensured to the greatest extent. If the mobile phone is not used for a long time, the polymer lithium battery must be fully charged first, and then the battery must be fully charged, and there is no need to put the battery on the charging head. If the polymer lithium battery is not used for a long time, it is very It may cause the rechargeable battery to separate from the middle of the mobile phone, thereby jeopardizing the configuration of the mobile phone. Repair and maintenance methods of polymer lithium battery: 1. First, the new battery is fully charged. Assuming that the recently purchased rechargeable batteries have to be fully charged before application, the battery charging operating voltages are generally close to each other and do not need to exceed the operating voltage. The battery must be charged and discharged after it is full, and it is best to maintain a small current when charging and discharging. The final job is to carry out automatic charging according to the steps described, and look back at the circulation system to ensure that it can be applied three times. 2. To prevent overcharging. There is a strict regulation for the selection of charging heads. If some charging heads are not fully charged, they will be powered off in the future, and the charging of the battery is not terminated after the charging is completed, which will cause unnecessary harm to the rechargeable battery. Disclaimer: Some pictures and content of articles published on this site are from the Internet. If there is any infringement, please contact to delete. Previous: What should I pay attention to when replacing the lithium battery pack?